To enter Safe Mode, press Windows + R to open Run. Type MSCONFIG and click OK. On System Configuration, go to the Boot tab. Under Boot Options, tick Safe Boot and click OK. You will then be prompted to restart your computer. After the system reboots, you will enter Safe Mode. See if the DVD drive works. Whatever the problem is, the culprits and therefore the fixes are quite similar. Try the DVD player troubleshooting tips below. Fix 1. Check if the optical disc drive is dirty or broken. Dust is always the culprit for most DVD player not read /load errors. Dust around the laser will block the player to read the disc data via the laser beam. 9,787 satisfied customers. My 2004 DVD player isn't working. What do you mean. It's a. we changed fuse #4 and disconnected the battery the red light comes on when you push the eject button and it takes the disc and ejects it but screen … read more. To re-enable the DVD player buttons, turn the audio unit off and back on. The headphone symbol lights up on the audio unit display to indicate the DVD player buttons are re-enabled. If the concern remains and the fault is not detected. (go see symptom chart) Preset button 1 = Audio Internal/External tests. Trying to replace a non-working overhead DVD player. Of course the seller on Ebay said it was compatible. It was removed from a 2006 Expedition and I have a 2003 Expedition. I thought it was an identical connector turns out not to be the case. The newer DVD player also has infa-red for headphones, otherwise it visually looks the same. Solution 1 - Match up the Cable Connection. The DVD player black and white issue is most likely to be caused by the incorrect cabling. As you know, many DVD/Blu-ray players have more than one connection type. Generally, a DVD player can be hooked up to a TV set via an HDMI, composite, A/V, component or S-Video cable. Location: Foothills of the Macedon Ranges. Posts: 18,343. Re: DVD Player Fitted To Territory's. Quote: Originally Posted by mad2. not sure where i saw it/commented, but if you know who was looking for the cover [or it was you] i've found what 'appears' to be a complete Alpine unit. Place a different disc in the player and attempt to play. Use a brand new disc if possible. The player will not read a damaged disc and if the original is scratched and has been exposed to the elements, it may be the disc and not the player. In this case, the disc will simply not play and requires replacement. Video of the Day. LolJMh.

ford dvd player not working